Adjustable Floor Inlet (Chrome)
Adjustable Floor Inlet (Chrome)
NOZBART® Adjustable Floor Inlet (Chrome)
Nozbart nozzles are made of durable and high-quality plastic materials and offer a wide range of solutions with over 400 product variations to meet different needs. Standing out with material quality and manufacturing precision, Nozbart nozzles deliver an experience beyond expectations in terms of performance and variety.
Key Features:
A wide product range with nozzles suitable for all types of pools, including concrete, liner, panel, and polyester pools.
The ball is secured by tightening the locking segment with a wrench. Unlike other models on the market, the ball does not fall into the pool when swimmers remove the nozzle cap.
The components inside the nozzle body are compatible with each other. Depending on your needs:
- Ball-type wall inlet nozzles with different flow rates,
- Flow-adjustable bottom inlet nozzles,
- Side-outlet inlet nozzles,
- Safety cage (fixed flow rate) inlet-suction nozzles,
- Vacuum nozzles can be effortlessly interchanged and used.
Solvent-weld models can be glued into 63 mm U-PVC (PN10) pipes.
Threaded models are compatible with 2” pipe threads. All models allow bonding of 50 mm U-PVC pipe inside.
Hinged models provide easy installation even in cases of up to 10 degrees of misalignment, thanks to their full ball design on the bonding side.
Ball-type inlet nozzles are specially manufactured with flow rates of 2.2 – 4.5 – 7 m³/h. Therefore, unlike other models on the market, they do not require additional labor or tools to break the ball. They are ready to use at the desired flow rate.
The nozzles are made from original ABS material. They are UV- and antioxidant-stabilized for long-lasting durability.
Our ball-type (with safety cage) and bottom inlet nozzles comply with EN 13451-3.
(Finger jam is secure and the holes are smaller than 8 mm.) — (Not included in list as it's already in English.)
Bottom inlet nozzles, with their special design, circulate water at the pool floor. They help lift debris to the surface, allowing it to be discharged through overflow channels or the skimmer, helping keep the pool floor clean.
Flow-adjustable nozzles allow for precise flow control. Once adjusted, the top screw is tightened to lock it in place, ensuring it stays fixed and provides excellent pool balance.
Model:
Adjustable Floor Inlet (Chrome)
| Flow Rate | 63 mm U-PVC PN10 Solvent Weld / Inside - 50 mm Solvent Weld | Hinged (63 mm PN10) / Solvent Weld | 2" Threaded / Inside - 50 mm Solvent Weld |
|---|---|---|---|
| m³/hour | Code | Code | Code |
| 0-4,5 | NOZ-105K | NOZ-205K | NOZ-305K |
| 0-4,5 | NOZ-105DK | NOZ-205DK | NOZ-305DK |
• Nozzles are manufactured from original ABS material.
• They are UV-resistant and contain antioxidant additives for long-lasting durability.
• Our ball-type (with safety cage) and bottom inlet nozzles comply with EN 13451- 3 standards.
• They are finger entrapment safe, with holes smaller than 8 mm.
• Solvent-weld models are suitable for bonding into 63 mm U-PVC pipes rated at 10 bar.