Wall Inlet with Pivoting Ball (Chrome)
Wall Inlet with Pivoting Ball (Chrome)
Product Description
NOZBART® Wall Inlet with Pivoting Ball (Chrome)
Nozbart nozzles are manufactured from high-quality, durable plastic materials and offer a wide range of solutions with over 400 product variations, designed to meet diverse needs. With exceptional material quality and precise manufacturing, Nozbart nozzles provide a performance and versatility that exceeds expectations.
Key Features:
- A wide range of nozzles suitable for all types of pools, including concrete, liner, panel, and polyester pools.
- The nozzle's ball is securely fixed by tightening the screw segment with a wrench. Unlike other models, the ball will not fall into the pool when the nozzle cap is removed by swimmers.
- All internal components of the nozzle body are compatible with each other. Depending on your needs, you can easily switch between: Various flow-rate ball-side feeding nozzles, Flow-adjustable bottom-side feeding nozzles, Side-outlet feeding nozzles, Grille (fixed flow rate) feeding- suction nozzles, Vacuum nozzles.
- Various flow-rate ball-side feeding nozzles,
- Flow-adjustable bottom-side feeding nozzles,
- Side-outlet feeding nozzles,
- Grille (fixed flow rate) feeding- suction nozzles,
- Vacuum nozzles.
- Glue-on models can be glued into 63 mm U-PVC (PN10) pipes.
- Threaded models feature 2” pipe threads. All models are compatible with 50 mm U-PVC pipes.
- Hinged models feature a full ball design on the glue side, ensuring seamless installation even in system lines with up to a 10-degree deviation.
- Ball feeding nozzles are specially designed for flow rates of 2.2, 4.5, and 7 m³/h. Therefore, unlike other models on the market, no additional tools or components are required to break the ball. These nozzles are ready for use at the desired flow rate.
- Nozzles are made from original ABS material, UV and antioxidant-enhanced for long durability.
- Ball (Safety Caged) and bottom-side feeding nozzles are compliant with the EN 13451-3 standard.
- Finger jam is secure, with holes smaller than 8 mm. (This sentence is excluded since it’s in English.)
- Bottom-side feeding nozzles are specially designed to move the water on the pool floor. This helps lift debris to the surface, where it can be removed through the overflow channels or skimmers, ensuring the pool floor stays clean.
- Flow-adjustable nozzles allow for precise flow rate adjustment. Once adjusted, the screw on top is tightened to lock the setting, ensuring a stable position and perfect pool balance.
| Model | Flow Rate | 63 mm U-PVC PN10 Solvent Weld / Inside - 50 mm Solvent Weld | Hinged (63 mm PN10) | 2" Threaded / Inside - 50 mm Solvent Weld |
|---|---|---|---|---|
| Wall Inlet with Pivoting Ball (Chrome) | m³/hour | CODE | CODE | CODE |
| Ø17.5 mm Safety cage | 2,2 | NOZ-101K | NOZ-201K | NOZ-301K |
| Ø22.8 mm Safety cage | 4,5 | NOZ-102K | NOZ-202K | NOZ-302K |
| Ø27.0 mm Safety cage | 7 | NOZ-103K | NOZ-203K | NOZ-303K |
| Ø20 mm Full Bore | 4,5 | NOZ-104K | NOZ-204K | NOZ-304K |
- The nozzles are made from original ABS material.
- They are UV- and antioxidant-stabilized for long-lasting durability.
- Our nozzles with pivoting ball (with safety cage) and bottom inlets comply with EN 13451-3.
- They are finger entrapment-safe, with openings smaller than 8 mm.
- Solvent-weld models are suitable for bonding into 63 mm U-PVC pipes rated at 10 bar.