Liner Wall Inlet With Pivoting Ball (Chrome) With Brass Insert
Liner Wall Inlet with Pivoting Ball (Chrome) With Brass Insert
Product Description
NOZBART® Wall Inlet with Pivoting Ball (Chrome) With Brass Insert
Nozbart Nozzles are manufactured from durable, high-quality plastic materials and offer a wide range of over 400 product variants to meet diverse needs. Standing out with material quality and manufacturing precision, Nozbart nozzles deliver an experience that exceeds expectations in terms of performance and variety.
Key Features:
- A broad product range with nozzles suitable for all types of pools, including concrete, liner, panel, and polyester pools.
- The sealing ring is tightened with a key to secure the ball in place. Unlike other models on the market, the ball does not fall into the pool when swimmers remove the nozzle cover.
- Internal components of the nozzle body are fully compatible with each other. According to your requirements, you can easily switch between: Ball nozzles with side feed at various flow rates, Flow-adjustable bottom feed nozzles, Side outlet feed nozzles, Fixed flow cage (fixed flow) feed-suction nozzles, Vacuum nozzles.
- Ball nozzles with side feed at various flow rates,
- Flow-adjustable bottom feed nozzles,
- Side outlet feed nozzles,
- Fixed flow cage (fixed flow) feed-suction nozzles,
- Vacuum nozzles.
- Adhesive models can be glued into 63 mm U-PVC (PN10) pipes.
- Threaded models feature 2” pipe threads. All models can accommodate 50 mm U-PVC pipes.
- Hinged models provide hassle-free installation with up to 10° tolerance for pipeline misalignment due to the full ball design on the adhesive side.
- Ball feed nozzles are specially manufactured for flow rates of 2.2, 4.5, and 7 m³/h. Therefore, unlike other models on the market, no additional labor or tools are required to break the ball. They are ready to use at your desired flow rate.
- Nozzles are made from original ABS material, enhanced with UV and antioxidant additives for long-lasting durability.
- Our ball feed (with safety cage) and bottom feed nozzles comply with EN 13451-3 standards.
- Finger jam is secure, and the holes are smaller than 8 mm.
- Bottom feed nozzles feature a special design that circulates water at the pool floor, lifting dirt to the surface to be removed through overflow channels or skimmers. This helps keep the pool floor clean.
- Flow-adjustable nozzles allow precise flow regulation. Once adjusted, the upper screw is tightened to lock the position, ensuring stable and perfect pool water balance.
| Model | Flow Rate | 63 mm U-PVC PN10 Adhesive / Inside 50 mm Adhesive | Hinged (63 mm PN10) / Adhesive | 2" Threaded / Inside 50 mm Adhesive |
|---|---|---|---|---|
| Wall Inlet with Pivoting Ball (Chrome) With Brass Insert | m³/hour | Code | Code | Code |
| Ø17,5 mm Safety cage | 2,2 | NOZ-401K | NOZ-501K | NOZ-601K |
| Ø22,8 mm Safety cage | 4,5 | NOZ-402K | NOZ-502K | NOZ-602K |
| Ø27,0 mm Safety cage | 7 | NOZ-403K | NOZ-503K | NOZ-603K |
| Ø20 mm Full Bore | 4,5 | NOZ-404K | NOZ-504K | NOZ-604K |
- Nozzles are manufactured from genuine ABS material.
- They are UV-resistant and contain antioxidant additives, ensuring long-lasting durability.
- Our ball nozzles (with safety cage) and bottom feed nozzles comply with EN 13451-3 standards.
- Finger pinch protection is ensured, with holes smaller than 8 mm.
- Adhesive models are suitable for bonding inside 63 mm U-PVC pipes rated for 10 Bar pressure.